Installing older version of GCC in Debian

I was compiling caffe today, and found that CUDA requires GCC version of <= 5. I have no other options but to install a older version of GCC on my Debian rig.

However, directly apt-get in result the following error:

Package gcc-4.9 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source

E: Package 'gcc-4.9' has no installation candidate

To install older GCC (in this case GCC-4.9) on my Debian 9, I need to do add the ubuntu-toolchain test repository:

sudo vi /etc/apt/sources.list

Add the following lines:

deb http://ppa.launchpad.net/ubuntu-toolchain-r/test/ubuntu xenial main
deb-src http://ppa.launchpad.net/ubuntu-toolchain-r/test/ubuntu xenial main

Note that I used xenial because gcc-4.9 is available on xenial:
https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test

Notice that gcc-4.9 is only available on 16.04, 14.04.1, and 12.04, I have chosen the latest one (16.04), which is xenial:

Now, I can install gcc-4.9 successfully:

sudo apt-get install gcc-4.9

Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libxnvctrl0 nvidia-settings
Use 'sudo apt autoremove' to remove them.
Suggested packages:
  gcc-4.9-multilib gcc-4.9-doc gcc-4.9-locales libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg libasan1-dbg
  liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libquadmath0-dbg
The following NEW packages will be installed:
  gcc-4.9
0 upgraded, 1 newly installed, 0 to remove and 218 not upgraded.
Need to get 0 B/5,684 kB of archives.
After this operation, 18.4 MB of additional disk space will be used.
Selecting previously unselected package gcc-4.9.
(Reading database ... 235901 files and directories currently installed.)
Preparing to unpack .../gcc-4.9_4.9.4-2ubuntu1~16.04_amd64.deb ...
Unpacking gcc-4.9 (4.9.4-2ubuntu1~16.04) ...
Setting up gcc-4.9 (4.9.4-2ubuntu1~16.04) ...
Processing triggers for man-db (2.7.6.1-2) ...

gcc-4.9 --version

gcc-4.9 (Ubuntu 4.9.4-2ubuntu1~16.04) 4.9.4
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

TL-WR703N Flash OpenWrt over U-Boot

Here is the U-Boot commands to flash the OpenWrt firmware over U-Boot.

1. Obtain IP:
   

   dhcp
   

2. Note down the IP of the WR703N (i.e. 192.168.0.59), and the TFTP server (i.e. 192.168.0.134), press CTRL+C, then:
   

   setenv ipaddr 192.168.0.59
   setenv serverip 192.168.0.134
   

3. Write the OpenWrt image to RAM address 0x80800000:
   

   tftpboot 0x80800000 wrt.bin
   

4. Erase the FLASH from block 0x9F020000, for 0x3C0000 bytes in size, this is the size of the OpenWrt image:
   Note that 0x9F000000 is the start of FLASH, there are 64KiB U-Boot code + 64 KiB Data, so the OpenWrt image starts at 0x9F020000.
   

   erase 0x9F020000 +0x3C0000
   

5. Finally, we copy back the downloaded image from RAM back to the flash:
   

   cp.b 0x80800000 0x9F020000 0x3C0000
   

Rebuild Banana/Raspberry Pi OS after SD Card Corruption

My Banana Pi M1+ just suffered SD Card corruption, the OS simply won't boot. I have to plug the SD card to a Linux machine and run fsck:

fsck -f -y /dev/sda2

Funny thing is, it appears to be fixed at the first run, but after I run fsck again, more errors are popping up for fixing.
I have to run fsck few times until no more new errors come up.

Then, I booted up the system, after running it awhile, I saw kernel error messages firing everywhere, saying some issues about kernel modules and man (man pages) binary.
I am now quite sure that there is a SD card corruption which corrupted some system files. Mounting the SD card on a Linux machine again, I copied the whole /lib folder from the original image to my SD card OS partition, which hope fixes the kernel module issues.
Then, I mounted the FAT boot partition, and copied the original kernel and initrd to the SD card.
After booting to the OS, I immediately try to rebuild the system by reinstalling "base" packages:

First batch:

sudo apt-get install --reinstall adduser base-files base-passwd bash bsdutils coreutils dash debconf debianutils diffutils dpkg e2fslibs e2fsprogs findutils gcc-6-base grep gzip hostname init init-system-helpers initscripts insserv libacl1 libapparmor1 libattr1 libaudit-common libaudit1 libblkid1 libbz2-1.0 libc-bin libc6 libcap2 libcap2-bin libcomerr2 libcryptsetup4 libdb5.3 libdebconfclient0 libdevmapper1.02.1 libfdisk1 libgcc1 libgcrypt20 libgpg-error0 libkmod2 liblzma5 libmount1 libncurses5 libncursesw5 libpam-modules libpam-modules-bin libpam-runtime libpam0g libpcre3 libprocps4 libseccomp2 libselinux1 libsemanage-common libsemanage1 libsepol1 libsmartcols1 libss2 libsystemd0 libtinfo5 libudev1 libustr-1.0-1 libuuid1 locales login lsb-base makedev mawk mount multiarch-support ncurses-base ncurses-bin passwd perl-base procps sed sensible-utils systemd systemd-sysv sysv-rc sysvinit-utils tar tzdata util-linux

Second batch:

sudo apt-get install --reinstall apt apt-utils busybox-initramfs bzip2 console-setup console-setup-linux cpio cron debconf-i18n dh-python distro-info-data eject file gcc-5-base gnupg gpgv ifupdown initramfs-tools initramfs-tools-bin initramfs-tools-core iproute2 iputils-ping isc-dhcp-client isc-dhcp-common kbd keyboard-configuration klibc-utils kmod less libapt-inst2.0 libapt-pkg5.0 libatm1 libbsd0 libdns-export162 libestr0 libexpat1 libffi6 libfribidi0 libgmp10 libgnutls-openssl27 libgnutls30 libhogweed4 libidn11 libisc-export160 libjson-c2 libklibc liblocale-gettext-perl liblz4-1 libmagic1 libmnl0 libmpdec2 libnettle6 libnewt0.52 libnih1 libp11-kit0 libpcre3 libpng12-0 libpopt0 libpython3-stdlib libpython3.5-minimal libpython3.5-stdlib libreadline6 libslang2 libsqlite3-0 libssl1.0.0 libssl1.0.2 libstdc++6 libtasn1-6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4 libxtables11 linux-base locales logrotate lsb-release mime-support net-tools netbase netcat-openbsd python3 python3-minimal python3.5 python3.5-minimal readline-common resolvconf rsyslog sudo ubuntu-keyring ubuntu-minimal ucf udev ureadahead vim-common vim-tiny

Fixing manpage issues:

sudo rm -rf /var/cache/man/*
sudo apt-get install --reinstall man-db manpages

It seems the system is running great now.

ESP32 SSH Server

I was always wondering whether it is possible to start a SSH server on my little ESP32 board, and I don't want to implement the SSH protocol by myself.

There are several lightweight SSH library out there, however, most of them require POSIX support, which is quite messy to port them to the ESP32.

Upon more research, I found that WolfSSH does not require much POSIX stuff, so I decided to port that to ESP32.

WolfSSH: https://github.com/hopkinskong/wolfssh-esp32
WolfSSL: https://github.com/hopkinskong/wolfssl-esp32

Now, I did not use ESP32 Hardware Crypto Acceleration, only the HW RNG is used for the crypto functions. Also, using PuTTY will unable to connect to the server due to some invalid crypto keys presented to the server.

Proof of concept of SSH<->UART1:
https://github.com/hopkinskong/esp32-ssh-server
Images:
Connection to the ESP32 SSH Server, prompting login:

Logged in, shows my Banana Pi U-Boot command prompt as I have connected the ESP32 UART1 to my Banana Pi Serial Console:

Shows it is my Banana Pi's U-Boot:

Booting Linux, I can now remotely serial debug my Banana Pi:

Note that when using PuTTY, the server will actively close the connection due to some key issues: